世新泵浦
Home
 
Characteristic
Use
 

The entire series electric motor uses the B level coil and through therigorous tube procedure, again passes through 凡立水樹脂 the resin tocontain soaks with around 5 hours dryinging, achieved the best insulating protection, may provide the long time non- question the revolution.

   
 

Uses imports the bearing, high rotates the precision, the low noise low vibration and the low friction torque, may enhance the long-term revolution life, the outer covering all not steel 304 gables, does not live,anti- divulges. (MS-SS, MS-St)

   
 

Entire pours into the special-purpose insulating oil (MS-SS, MS-S t),provides the motor best radiation, cooling and the lubrication.

   
 

May use in various types submersible pump and the counter seepage turbo-charged module.

   
 

The standard specification junction box may supply the widespread application (nema side croze axis reaches several 14, the radial direction festival 24,/48 angle of pressure 30°).

 
油冷_構造剖面圖 油冷_材質規格一覽表
Inch Model HP Volts HZ Pull-load
Current
IN(a)
Motor Efficiency% Power Factor% Bimensions
50% 75% 100% cosØ
50%
cosØ
75%
cosØ
100%
Length
(mm)
Weight
(mm)
4 Inch
Three
Wire 3Ø
H13 1 220 60 3.3 54 62 63 92 87 90 432 12
H1.53 1.5 220 60 4.7 62 65 65 83 89 91 452 13.2
H23 2 220 60 6.5 64 64 68 74 83 87 472 14.5
H33 3 220 60 9 76 70 76 71 81 86 542 19
H53 5 220 60 16 65 68 67 70 80 86 642 23.5
Inch Model HP Volts HZ Pull-load
Current
IN(a)
Motor Efficiency% Power Factor% Bimensions
50% 75% 100% cosØ
50%
cosØ
75%
cosØ
100%
Length
(mm)
Weight
(mm)
4 Inch
Three
Wire 1Ø
H11 1 220 60 6 45 55 62 92 95 97 432 12
H1.51 1.5 220 60 8 51 61 65 96 98 9 452 13.2
H21 2 220 60 12 50 60 65 98 99 99 472 14.5
H31 3 220 60 18 49 58 62 96 98 99 542 19
H51 5 220 60 28 60 67 68 94 97 98 642 23.5